Posted on

Tooth Fairy Pillow In The Hoop Machine Embroidery Walkthrough

This design is super simple and super fun! All you need is some fabric, thread, stabilizer and stuffing.  You will need two pieces of fabric for the body of the pillow, front and back. The pocket is made by pressing a piece of fabric in half.

Hoop the stabilizer only and sew step one. This is the die-line. Place your chosen front fabric over the die-line and sew step two. This is the tack-down.

IMG_0587

 

Next sew step three, the die-line for the pocket. Place the folded pressed fabric over the die-line with the folded edge matching up with the top of the die-line. Sew step four, the tack-down. Then step six which is the decorative stitch.

 

 

 

 

 

IMG_0589

 

The next eight thread changes are the fairy (see attached PDF for details). After the fairy is complete place the back side fabric front side down and stitch the last step which is the seam or final tack-down. Remove from hoop,  Now remove it from the stabilizer, cut 1/8 - 1/4 inch from the seam, turn right side out, stuff and stitch. Voila! Tooth Fairy pillow!

Posted on 1 Comment

In The Hoop Machine Embroidery Tooth Fairy Pillow Walkthrough

This design is super simple and super fun! All you need is some fabric, thread, stabilizer and stuffing.  You will need two pieces of fabric for the body of the tooth, front and back. The pocket is made by pressing a piece of fabric in half. The finished piece of pressed fabric should be about 2/3 - 3/4 the size of the tooth. We used a contrasting fabric for the backside pocket.

Hoop only your stabilizer and sew step one. This is the die-line for the pillow. Place the pillow fabric over the die-line and sew step two. This is a tack-down. Sew step three, the eyes. Next, step four, the mouth.

IMG_0584

 Next place the pocket fabric over the tooth.

 

 

 

 

 

 

IMG_0585

 

 Now place the back piece of fabric front side down over the entire design and sew step five. This is the seam stitch. Now remove it from the stabilizer, cut 1/8 - 1/4 inch from the seam, turn it right side out, stuff and stitch it up. Voila! Tooth  Fairy pillow!

Posted on

In the Hoop Kitty Mask Tutorial

These in the hoop masks are super fun! You can create an easy DIY costume in a snap, so if you are a procrastinator like I am these sure come in handy. All of our masks come in two sizes so they are perfect for little ones and adults. These are made entirely in the hoop and just need a bit of elastic or ribbon to stay on. We use craft foam as the base and wouldn’t suggest anything over 2mm thick.

Continue reading In the Hoop Kitty Mask Tutorial

Posted on

In the Hoop Fox Mask Tutorial

These in the hoop masks are super fun! You can create an easy DIY costume in a snap, so if you are a procrastinator like I am these sure come in handy. All of our masks come in two sizes so they are perfect for little ones and adults. These are made entirely in the hoop and just need a bit of elastic or ribbon to stay on. We use craft foam as the base and wouldn’t suggest anything over 2mm thick.

Continue reading In the Hoop Fox Mask Tutorial

Posted on

Tutorial In the Hoop Pumpkin Mask

These in the hoop masks are super fun! You can create an easy DIY costume in a snap, so if you are a procrastinator like I am these sure come in handy. All of our masks come in two sizes so they are perfect for little ones and adults. These are made entirely in the hoop and just need a bit of elastic or ribbon to stay on. We use craft foam as the base and wouldn't suggest anything over 2mm thick.

Continue reading Tutorial In the Hoop Pumpkin Mask